FLEXIBLE CABLE RISER WITH 32GT/S NRZ DIFFERENTIAL SIGNALING FOR NEXT-GENERATION SYSTEMS
PCIe® DirectAttached™ cable riser solution supports upto PCIe® 5.0 data rate of 32Gb/s, which can reduce signal loss by replacing high speed PCIe® trace on Multi-layer mother board with high speed cable directly.
Amphenol's PCIe® DirectAttached™ cable riser solution with PCIe® DirectAttaced™ CEM connector on one end of the cable allows the flexibility of a different connection on the other end of the cable, accommodating different PCB form factors such as MCIO, Multi-trak™, SlimSAS™, EDSFF, OCP NIC 3.0, Gen Z, or Backplane connectors.
Ideal for use in high-speed computing Datacenter server systems, GPU cards, Riser cards and accelerator cards, this revolutionary solution of using cable to replace legacy PCIe® riser cards provides cost-savings and space-savings by eliminating the need for the motherboard PCB and riser card PCBs. It also provides shorter manufacturing production lead-times as riser card PCBA can be done in parallel with cable soldering process.
To support a suite of applications, Amphenol has developed three options for DirectAttached™ Cable riser solutions:
- One-Piece solution: Integrated Press-fit Power+SB (Sideband) pin block with high-speed signal housing
- Two-Piece solution: Separate Power+SB pin block from high-speed signal housing, Power+SB pin block can be either Press-fit or PIP options
- Fully Cable Out solution: Power+SB Pin be directly attached to cable
One-piece and two-piece solutions are footprint compatible.
Amphenol tooled Gen 5 DirectAttached™ Cable Riser, configuration, X8 and X16 are available, and the mating interface is backward compatible with Gen 4/3/2/1.
- Backward mating adhering to standard PCIe® interface but the footprint is different from standard PCIe® CEM
- Wide range of positions available, X8 and X16 tooled
- Flexible selection with a variety of form factors for one cable end
FLEXIBLE CABLE RISER WITH 32GT/S NRZ DIFFERENTIAL SIGNALING FOR NEXT-GENERATION SYSTEMS
PCIe® DirectAttached™ cable riser solution supports upto PCIe® 5.0 data rate of 32Gb/s, which can reduce signal loss by replacing high speed PCIe® trace on Multi-layer mother board with high speed cable directly.
Amphenol's PCIe® DirectAttached™ cable riser solution with PCIe® DirectAttaced™ CEM connector on one end of the cable allows the flexibility of a different connection on the other end of the cable, accommodating different PCB form factors such as MCIO, Multi-trak™, SlimSAS™, EDSFF, OCP NIC 3.0, Gen Z, or Backplane connectors.
Ideal for use in high-speed computing Datacenter server systems, GPU cards, Riser cards and accelerator cards, this revolutionary solution of using cable to replace legacy PCIe® riser cards provides cost-savings and space-savings by eliminating the need for the motherboard PCB and riser card PCBs. It also provides shorter manufacturing production lead-times as riser card PCBA can be done in parallel with cable soldering process.
To support a suite of applications, Amphenol has developed three options for DirectAttached™ Cable riser solutions:
- One-Piece solution: Integrated Press-fit Power+SB (Sideband) pin block with high-speed signal housing
- Two-Piece solution: Separate Power+SB pin block from high-speed signal housing, Power+SB pin block can be either Press-fit or PIP options
- Fully Cable Out solution: Power+SB Pin be directly attached to cable
One-piece and two-piece solutions are footprint compatible.
Amphenol tooled Gen 5 DirectAttached™ Cable Riser, configuration, X8 and X16 are available, and the mating interface is backward compatible with Gen 4/3/2/1.
- Backward mating adhering to standard PCIe® interface but the footprint is different from standard PCIe® CEM
- Wide range of positions available, X8 and X16 tooled
- Flexible selection with a variety of form factors for one cable end
